CLI Guide

• Configure using severity as a parameter. For example, all informational events in storage category
are assigned poweroff as action, and email and snmp as notifications:
racadm eventfilters set -c cmc.alert.storage.info -n email,snmp
• Configure using subcategory as a parameter. For example, all configurations under the licensing
subcategory in the audit category are assigned poweroff as action and all notifications are enabled:
racadm eventfilters set -c cmc.alert.audit.lic -n all
• Configure using subcategory and severity as parameters. For example, all Information events under
the licensing subcategory in the audit category are assigned poweroff as action and all notifications
are disabled:
racadm eventfilters set -c cmc.alert.audit.lic.info -n none
fcp
Table 17. Details of fcp attribute
Description
Prompts you to change the password.
Synopsis
racadm fcp <enable/getstatus>
Input
• enable: Enables the force password change feature
• getstatus: Displays the status of force change password feature
NOTE: You must have the RAC_ADMIN privileges to run the fcp enable command.
Legal Values For the fcp get status, the values are:
• 0 : FCP Feature has been disabled on CMC.
• 1 : FCP Feature has been enabled on CMC.
Example
• To enable force change password feature:
racadm fcp enable
• To view the status of force change password feature:
racadm fcp getstatus
feature
Table 18. Details of feature attribute
Description Displays all active chassis features. The information displayed includes feature name, date activated and the serial
number of the SD card used to activate the feature.
Dell Feature Cards may contain more than a feature. After any feature included on a Dell Feature Card is activated
on a chassis, any other features that may be included on that Dell Feature Card cannot be activated on a different
chassis.
NOTE: To use this subcommand to deactivate FlexAddress, you must have the Chassis Configuration
Administrator privilege. A user with login privileges can view status only.
NOTE: To deactivate FlexAddress features, the chassis must be turned off.
Synopsis
• racadm feature -s
26 RACADM Subcommand Details