CLI Guide

Example
$ racadm getconfig -g cfgIPv6LanNetworking
cfgIPv6Enable=1
cfgIPv6AutoConfig=1
cfgIPv6Address=::
cfgIPv6PrefixLength=64
cfgIPv6Gateway=::
cfgIPv6DNSServersFromDHCP6=1
cfgIPv6DNSServer1=::
cfgIPv6DNSServer2=::
If both IPv4 and IPv6 are enabled on the CMC, IPv6 DNS servers take priority. The order of preference for DNS servers is:
• cfgIPv6DNSServer1
• cfgIPv6DNSServer2
• cfgDNSServer1
• cfgDNSServer2
cfgCurrentLanNetworking (Read Only)
This group displays the current CMC NIC properties.
Use this object with the getconfig subcommand.
To use this object property, you must have the CMC Login User privilege.
Synopsis
racadm getconfig -g cfgCurrentLanNetworking
cfgNicCurrentIpAddress (Read Only)
Table 337. Details of cfgNicCurrentIpAddress attribute
Description
Displays the static IP address to the CMC.
Legal Values
A Valid IPv4 address
Default
A Valid IPv4 address
cfgNicCurrentNetmask (Read Only)
Table 338. Details of cfgNicCurrentNetmask attribute
Description
Displays the static subnet mask for the CMC IP address
Legal Values
A Valid IPv4 subnet
CMC Property Database Group and Object Descriptions 151