CLI Guide

cfgChassisMaxPowerConservationModeTimestamp (Read
Only)
Table 308. Details of cfgChassisMaxPowerConservationModeTimestamp attribute
Description
The timestamp recorded when maximum power conservation mode is enabled.
Legal Values
Default
0
cfgChassisPerformanceOverRedundancy (Read or Write)
Table 309. Details of cfgChassisPerformanceOverRedundancy attribute
Description
Enables or disables server performance over power redundancy. When enabled, this option favors server
performance and server power-up over maintenance of power redundancy. When disabled, the system favors
power redundancy over server performance. If the power supply in the chassis does not provide sufficient power,
both for redundancy, as well as full performance, then some servers may not grant sufficient power for full
performance. In order to maintain redundancy, It may not be powered on.
Legal Values
• 0 — Disabled
• 1 — Enabled
Default 0
cfgChassisInMaxPowerCapacity (Read Only)
Table 310. Details of cfgChassisInMaxPowerCapacity attribute
Description
Indicates the total chassis power budget (in watts) available for chassis operation.
Legal Values
None
Default
None
cfgChassisInRedundancyReserve (Read Only)
Table 311. Details of cfgChassisInRedundancyReserve attribute
Description
Indicates the amount of redundant power (in watts) in reserve that can be used in the event if an AC grid or PSU is
unsuccessful. This value is 0 if the Redundancy Policy is set to 0 (no redundancy).
Legal Values
0 — (disabled)
1 — (enabled)
Default
None
cfgChassisInPowerServerAllocation (Read Only)
Table 312. Details of cfgChassisInPowerServerAllocation attribute
Description
Indicates (in watts) the cumulative power allocated to servers. There is no default as this parameter is specific to
the particular customer configuration.
CMC Property Database Group and Object Descriptions 143