CLI Guide

cfgRacTuneWebserverEnable (Read or Write)
Table 221. Details of cfgRacTuneWebserverEnable attribute
Description
Enables or disables the web server. If this property is disabled then it is not accessible using client web browsers.
This property has no effect on the Telnet/SSH or racadm interfaces.
Legal Values
• 1 (TRUE)
• 0 (FALSE)
Default
1
cfgRacTuneFipsModeEnable
Table 222. Details of cfgRacTuneFipsModeEnable attribute
Description Enables or disables the FIPS mode.
Legal Values 0 and 1
Default 0
Usage
racadm getconfig -g cfgRacTuning -o
cfgRacTuneFipsModeEnableracadm config -g
cfgRacTuning -o cfgRacTuneFipsModeEnable 1
NOTE: The firmware racadm prompts you to confirm whether the FIPS mode has to be enabled, but remote racadm
does not prompt you to do so.
cfgRacTuneTLSProtocolVersionEnable
Table 223. Details of cfgRacTuneTLSProtocolVersionEnable attribute
Description
Sets the minimum TLS protocol version.
Legal Values
• 0 - TLSv1.0, TLSv1.1, and TLSv1.2 are enabled.
• 1 - TLSv1.1 and TLSv1.2 are enabled.
• 2 - only TLSv1.2 is enabled.
Default 1
cfgRacTuneChassisNameInPromptEnable
Table 224. Details of cfgRacTuneChassisNameInPromptEnable attribute
Description Enables or disables display of the chassis name in the SSH prompt.
Legal Values
• 0—Disable
• 1—Enable
Default 0
NOTE: You must have the chassis configuration administrator privilege to set and get the
cfgRacTuneChassisNameInPromptEnable attribute.
cfgServerInfo
This group allows you to display and configure a server in the chassis.
122
CMC Property Database Group and Object Descriptions