CLI Guide

Default
300
cfgRacTuneDefCredentialWarningEnable (Read or Write)
Table 215. Details of cfgRacTuneDefCredentialWarningEnable attribute
Description
Displays warning during login if the default credentials warning property is set.
NOTE: Warning is displayed only with configure the user privilege.
Legal Values
• 1 — Enabled
• 0 — Disabled
Default
1 — Enabled
cfgRacTuneUserBlkEnable (Read or Write)
Table 216. Details of cfgRacTuneUserBlkEnable attribute
Description
Blocks the login for maximum of 5 minutes after 5 unsuccessful login attempts. The login using any interface such
as WSMAN or GUI is blocked after 5 unsuccessful attempts
NOTE: This is applicable only to configure the user privilege.
Legal Values
• 1 — Enabled
• 0 — Disabled
Default
0 — Disabled
cfgRacTuneSshPort (Read or Write)
Table 217. Details of cfgRacTuneSshPort attribute
Description
Specifies the port number used for the SSH interface.
NOTE: The following port numbers are reserved and cannot be used: 21, 68, 69, 111, 123, 161, 546,
801, 4096, 5988, 5989, 6900, 9000, and 60106.
Legal Values
10–65535
Default
22
cfgRacTuneTelnetPort (Read or Write)
Table 218. Details of cfgRacTuneTelnetPort attribute
Description
Specifies the port number used for the Telnet interface.
NOTE: The following port numbers are reserved and cannot be used: 21, 68, 69, 111, 123, 161, 546,
801, 4096, 5988, 5989, 6900, 9000, and 60106.
Legal Values
10–65535
Default
23
120 CMC Property Database Group and Object Descriptions