CLI Guide

Default
None
cfgTrapsCommunityName (Read or Write)
Table 199. Details of cfgTrapsCommunityName attribute
Description
Sets the community string (identical to the community name) used for authentication. The community string acts
as a password shared between different hosts over the network. This community string value must match with the
other hosts for any kind of communication through SNMP.
Legal Values
A string representing the community name.
Default
None
Example
racadm getconfig -g cfgTraps -i 2
# cfgTrapsIndex=2
cfgTrapsEnable=1
cfgTrapsAlertDestIpAddr=
cfgTrapsCommunityName=public
cfgTrapsSNMPv3UserId (Read Only)
Table 200. Details of cfgTrapsSNMPv3UserId attribute
Description
Displays the SNMP user ID of an existing CMC user.
Legal Values
1-16
Default
Empty
cfgTrapsSNMPv3UserName
Table 201. Details of cfgTrapsSNMPv3UserName attribute
Description
Configure SNMPv3 user name.
Legal Values
Any existing CMC user name.
Default
Empty
cfgRacTuning
This group is used to configure various configuration properties, such as valid ports and security port restrictions.
Use this object with the config or getconfig subcommands.
To use this object property, you must have the Chassis Configuration Administrator privilege.
NOTE:
You can configure a setting that does not have the hash sign (#) prefixed in the output. To modify a configurable
object, use the —o option.
The following sections provide information about the objects in the cfgRacTuning group.
NOTE: Only the following objects are displayed, if —m option is used:
116 CMC Property Database Group and Object Descriptions