CLI Guide

Legal Values
• 1 (TRUE)
• 0 (FALSE)
Default
0
cfgOobSnmp
This group contains parameters to configure the SNMP agent and trap capabilities of CMC. One instance of the group is allowed.
The CMC SNMP agent supports the standard RFC1213 mib-2 and the Dell enterprise-specific the MIB.
Use this object with the config or getconfig subcommands.
To use this object property, you must have the Chassis Configuration Administrator privilege.
NOTE: You can configure a setting that does not have the hash sign (#) prefixed in the output. To modify a configurable
object, use the —o option.
The following sections provide information about the objects in the cfgOobSnmp group.
cfgOobSnmpAgentCommunity (Read or Write)
Table 192. Details of cfgOobSnmpAgentCommunit attribute
Description
Specifies the SNMP Community Name used for SNMP traps. The community string acts as a password shared
between different hosts over the network. This community string value must match with the other hosts for any
kind of communication through SNMP.
Legal Values
A string of up to 31 characters.
Default
public
Example
racadm getconfig -g cfgOobSnmp
cfgOobSnmpTrapsEnable=1
cfgOobSnmpA
gentCommunity=public
cfgOobSnmpAgentEnable (Read or Write)
Table 193. Details of cfgOobSnmpAgentEnable attribute
Description
Enables or disables the SNMP agent in CMC.
Legal Values
• 1 (TRUE)
• 0 (FALSE)
Default
0
cfgOobSnmpProtocol
Table 194. Details of cfgOobSnmpProtocol attribute
Description
Specifies the SNMP protocol used for SNMP traps.
Legal Values
• 0 — All
114 CMC Property Database Group and Object Descriptions