CLI Guide

cfgRhostsNtpServer3 (Read or Write)
Table 158. Details of attribute - cfgRhostsNtpServer3
Description Specifies the third of three possible NTP servers.
Legal Values
A string representing a valid NTP server. For example, ntp3.ntp.net. At least one NTP server must be specified
and duplicate entries are not allowed.
Default
Null
cfgRhostsNtpMaxDist (Read or Write)
Table 159. Details of attribute - cfgRhostsNtpMaxDist
Description
Specifies the NTP maximum distance parameter used to aid in NTP configuration.
Legal Values
1–128
Default
16
cfgRhostsSyslogEnable (Read or Write)
Table 160. Details of attribute - cfgRhostsSyslogEnable
Description
To allow the RAC and SEL logs to be written to up to three remote syslog servers Enables or disables remote
syslog.
Legal Values
• 1 (TRUE)
• 0 (FALSE)
Default 0
cfgRhostsSyslogPort (Read or Write)
Table 161. Details of attribute - cfgRhostsSyslogPort
Description Remote syslog port number to use for writing the RAC and SEL logs to a remote syslog server.
This setting takes effect only if the cfgRhostsSyslogEnable parameter is set to 1(enabled).
Legal Values
10–65535
NOTE: The following port numbers are reserved and cannot be used: 21, 68, 69, 123, 161, 546, 801,
4096, 5988, 5989, 6900, 9000, 60106.
Default 514
cfgRhostsSyslogServer1 Read or Write)
Table 162. Details of attribute - cfgRhostsSyslogServer1
Description
To store the RAC and SEL logs specify the first of three possible remote syslog servers. This property is only valid if
cfgRhostsSyslogEnable is set to 1 (enabled).
Legal Values
Valid host name or IPv4 or IPv6 address.
Default
<blank>
104 CMC Property Database Group and Object Descriptions