CLI Guide

cfgNicUseDhcp (Read or Write)
Table 149. Details of attribute - cfgNicUseDhcp
Description
Specifies whether DHCP is used to assign the IPv4 address. If this property is set to 1 (TRUE) then the IPv4
address, subnet mask and gateway are assigned from the DHCP server on the network. If this property is set to
0(FALSE), the user can configure the cfgNicIpAddress, cfgNicNetmask and cfgNicGateway properties.
Legal Values
• 1 (TRUE)
• 0 (FALSE)
Default
0
cfgNicMacAddress (Read Only)
Table 150. Details of attribute - cfgNicMacAddress
Description
The NIC MAC address in the format: dd:dd:dd:dd:dd:dd, where d is a hexadecimal digit in range 0 – 9, A — F
Legal Values
String representing NIC MAC address.
Default
The current MAC address of NIC. For example, 00:12:67:52:51:A3.
cfgRemoteHosts
This group provides properties that allow configuration of the SMTP server for email alerts.
This group enables/disables and configures firmware updates, NTP, remote syslogging and SMTP email alerting.
Use this object with the config or getconfig subcommands.
To use this object property, you must have the Chassis Configuration Administrator privilege.
The following sections provide information about the objects in the cfgRemoteHosts group.
cfgRhostsFwUpdateTftpEnable (Read or Write)
Table 151. Details of attribute - cfgRhostsFwUpdateTftpEnable
Description
Enables or disables firmware update from a network TFTP server.
Legal Values
• 1 — (TRUE)
• 0 — (FALSE)
Default
1
cfgRhostsFwUpdateIpAddr (Read or Write)
Table 152. Details of attribute - cfgRhostsFwUpdateIpAddr
Description
Specifies the network TFTP server IPv4 or IPv6 address that is used for TFTP firmware update operations.
Legal Values
A string representing a valid IPv4 or IPv6 address. For example, 192.168.0.61
Default
For IPv4, it is 0.0.0.0
102 CMC Property Database Group and Object Descriptions