Manualshelf

CLI Guide

ManualsBrandsDell ManualsActive System ManagerChassis Management Controller Version 6.21 For Dell PowerEdge M1000e
101102103104105106107108109110
cfgNicEnable (Read or Write)
Table 145. Details of attribute - cfgNicEnable
Description
Enables or disables CMC network interface controller (NIC). If the NIC is disabled, the remote network interfaces to
CMC are no longer accessible and CMC is only available through the local or serial RACADM interface.
Legal Values
• 1 (TRUE)
• 0 (FALSE)
Default
1
cfgNicIpAddress (Read or Write)
Table 146. Details of attribute - cfgNicIpAddress
Description
Specifies the static IPv4 address.
NOTE: This parameter is only configurable if the cfgNicUseDhcp parameter is set to 0(FALSE).
Legal Values
String representing a valid IPv4 address. For example: 192.168.0.20.
Default
• 192.168.0.120
cfgNicNetmask (Read or Write)
Table 147. Details of attribute - cfgNicNetmask
Description
The subnet mask used for IP address.
This property is only valid if cfgNicUseDhcp is set to0(FALSE).
NOTE: This parameter is only configurable if the cfgNicUseDhcp parameter is set to 0(FALSE).
Legal Values
String representing a valid subnet mask. For example: 255.255.255.0.
Default
255.255.255.0
cfgNicGateway (Read or Write)
Table 148. Details of attribute - cfgNicGateway
Description
Indicates the gateway IPv4 address.
The gateway IPv4 address used for static assignment of the RAC IP address. This property is only valid if
cfgNicUseDhcp is set to0(FALSE).
NOTE: This parameter is only configurable if the cfgNicUseDhcp parameter is set to 0 (FALSE).
Legal Values
String representing a valid gateway IPv4 address. For example: 192.168.0.1.
Default
192.168.0.1
CMC Property Database Group and Object Descriptions 101