Manualshelf

Users Guide

ManualsBrandsDell ManualsActive System ManagerChassis Management Controller Version 6.20 For Dell PowerEdge M1000e
111112113114115116117118119120
Setting Description
• Alphanumeric—"a-b" or "A-B"
• Numeric—"0-9"
• Hyphen—"–"
Ensure that the DNS name prex does not begin with a hyphen. The default prex is "idrac".
Only the prex of the iDRAC DNS name is stored in the server prole.
3 Click Save QuickDeploy Settings to save the settings. If you have changed the iDRAC network setting, click Apply iDRAC Network
Settings to deploy the settings to the iDRAC.
The QuickDeploy feature only executes when it is enabled, and a server is inserted in the chassis. If Set iDRAC Root Password on
Server Insertion
and QuickDeploy Enabled are enabled, the user is prompted using the LCD interface to allow or not allow the
password change. If there are network conguration settings that dier from the current iDRAC settings, the user is prompted to
either accept or not accept the changes.
NOTE: When there is a LAN or IPMI over LAN dierence, the user is prompted to accept the QuickDeploy IP address
setting. If the dierence is the DHCP setting, the user is prompted to accept the DHCP QuickDeploy setting.
To copy the QuickDeploy settings into the iDRAC Network Settings section, click Auto-Populate Using QuickDeploy Settings. The
QuickDeploy network congurations settings are copied into the corresponding elds in the iDRAC Network Conguration Settings
table.
NOTE: Changes that are made to QuickDeploy elds are immediate, but changes that are made to one or more iDRAC
server network conguration settings may require a couple of minutes to propagate from CMC to iDRAC. Clicking Refresh
too soon may display only partially correct data for one or more iDRAC servers.
QuickDeploy IP Address Assignments For Servers
The gure here shows the QuickDeploy IP addresses assignment to the servers when there are eight full height servers in a M1000e
chassis:
The following gure shows the QuickDeploy IP addresses assignment to the servers when there are 16 half height severs in a M1000e
chassis:
The following gure shows the QuickDeploy IP addresses assignment to the servers when there are 32 quarter height severs in a M1000e
chassis:
112
Conguring Server