Users Guide
Conguring Virtual LAN Tag Properties for CMC Using Web
Interface
To congure VLAN for CMC using the CMC Web interface:
1 Go to any of the following pages:
• In the system tree, go to Chassis Overview and click Network > VLAN.
• In the system tree, go to Chassis Overview > Server Overview and click Network > VLAN.
The VLAN Tag Settings page is displayed. VLAN tags are chassis properties. They remain with the chassis even when a component is
removed.
2 In the CMC section, enable VLAN for CMC, set the priority and assign the ID. For more information about the elds, see the CMC
Online Help.
3 Click Apply. The VLAN tag settings are saved.
You can also access this page from the Chassis Overview > Servers > Setup > VLAN subtab.
Conguring Virtual LAN Tag Properties for CMC Using
RACADM
1 Enable the VLAN capabilities of the external chassis management network:
racadm config -g cfgLanNetworking -o
cfgNicVLanEnable 1
2 Specify the VLAN ID for the external chassis management network:
racadm config -g cfgLanNetworking -o cfgNicVlanID <VLAN id>
The valid values for <VLAN id> are 1– 4000 and 4021– 4094. Default is 1.
For example:
racadm config -g cfgLanNetworking -o cfgNicVlanID
1
3 Then, specify the VLAN priority for the external chassis management network:
racadm config -g cfgLanNetworking -o
cfgNicVLanPriority <VLAN priority>
The valid values for <VLAN priority> are 0–7. Default is 0.
For example:
racadm config -g cfgLanNetworking -o
cfgNicVLanPriority 7
You can also specify both the VLAN ID and the VLAN priority with a single command:
racadm setniccfg -v <VLAN id> <VLAN priority>
For example:
racadm setniccfg -v 1 7
4 To remove the CMC VLAN, disable the VLAN capabilities of the external chassis management network:
racadm config -g cfgLanNetworking -o
cfgNicVLanEnable 0
84
Conguring CMC