Users Guide

Conguring CMC
CMC enables you to congure CMC properties, set up users, and set up alerts to perform remote management tasks.
Before you begin conguring the CMC, you must rst congure the CMC network settings to allow the CMC to be managed remotely. This
initial conguration assigns the TCP/IP networking parameters that enable access to the CMC. For more information, see Setting Up Initial
Access to CMC.
You can congure CMC using Web interface or RACADM.
NOTE: When you congure CMC for the rst time, you must be logged in as root user to execute RACADM commands on a
remote system. Another user can be created with privileges to congure CMC.
After setting up the CMC and performing the basic conguration, you can do the following:
• Modify the network settings if required.
• Congure interfaces to access CMC.
• Congure LED display.
• Setup Chassis Groups if required.
• Congure Servers, IOMs, or iKVM.
• Congure VLAN Settings.
• Obtain the required certicates.
• Add and congure CMC users with privileges.
• Congure and enable email alerts and SNMP traps.
• Set the power cap policy if required.
Topics:
• Viewing and Modifying CMC Network LAN Settings
• Conguring CMC Network and Login Security Settings
• Conguring Virtual LAN Tag Properties for CMC
• Federal Information Processing Standards
• Conguring Services
• Conguring CMC Extended Storage Card
• Setting Up Chassis Group
• Obtaining Certicates
• Chassis Conguration Proles
• Conguring Multiple CMCs through RACADM Using Chassis Conguration Proles
• Conguring Multiple CMCs through RACADM Using Conguration File
• Viewing and Terminating CMC Sessions
• Conguring Enhanced Cooling Mode for Fans
6
78 Conguring CMC