Users Guide

Viewing Information and Health Status For Individual
IOM
To view health status of the individual IOMs, in the CMC Web interface, do any of the following:
1 Go to Chassis Overview > Properties > Health.
The Chassis Health page is displayed. The lower section of Chassis Graphics depicts the rear view of the chassis and contains the
health status for the IOMs. IOM health status is indicated by the overlay of the IOM subgraphic. Move the cursor to hover over the
individual IOM subgraphic. The text hint provides additional information on that IOM. Click the IOM subgraphic to view the IOM
information on the right.
2 Go to Chassis Overview and expand I/O Module Overview in the system tree. All the IOMs (1–6) appear in the expanded list. Click
the IOM (slot) you want to view.
The I/O Module Status page (separate from the overall I/O Module Status page) specic to the IOM slot is displayed. For more
information, see the CMC Online Help.
NOTE: After updating or power cycling the IOM/IOA, make sure that the operating system of the IOM/IOA is also booted
correctly. Else, the IOM status is displayed as "Oine".
Viewing Information and Health Status of Fans
CMC, which controls fan speeds, automatically increases or decreases fan speeds based on system wide events. CMC generates an alert
and increases the fan speeds when the following events occur:
• CMC ambient temperature threshold is exceeded.
• A fan fails.
• A fan is removed from the chassis.
NOTE
: During updates of CMC or iDRAC rmware on a server, some or all of the fan units in the chassis spin at 100%. This is
normal.
To view the health status of the fans, in the CMC Web interface, do any of the following:
1 Go to Chassis Overview > Properties > Health.
The Chassis Health page is displayed. The lower section of chassis graphics provides the rear view of the chassis and contains the
health status of the fan. Fan health status is indicated by the overlay of the fan subgraphic. Move the cursor over the fan subgraphic.
The text hint provides additional information on the fan. Click the fan subgraphic to view the fan information on the right.
2 Go to Chassis Overview > Fans > Properties.
The Fans Status page provides the status and speed measurements in revolutions per minute, or RPMs, of the fans in the chassis.
There can be one or more fans.
NOTE
: In the event of a communication failure between CMC and the fan unit, CMC cannot obtain or display health status
for the fan unit.
For more information, see the CMC Online Help.
Viewing iKVM Information and Health Status
The local access KVM module for the Dell M1000e server chassis is called the Avocent Integrated KVM Switch Module, or iKVM.
To view the health status of the iKVMs associated with the chassis, do any of the following:
1 Go to Chassis Overview > Properties > Health.
The Chassis Health page is displayed. The lower section of chassis graphics provides the rear view of the chassis and contains the
health status of the iKVM. iKVM health status is indicated by the overlay of the iKVM subgraphic. Move the cursor over an iKVM
76
Viewing Chassis Information and Monitoring Chassis and Component Health