Users Guide

Re-installing Server Component Firmware
You can re-install the rmware image of the currently installed rmware for selected components or devices across one or more servers.
The rmware image is available within the Lifecycle Controller.
Re-installing Server Component Firmware Using Web Interface
To re-install Server Component Firmware:
1 In the system tree, go to Server Overview, and then Click > Update > Server Component Update.
The Server Component Update page is displayed.
2 Filter the component or device (optional).
3 In the Current Version column, select the check box for the component or device for which you want to re-install the rmware.
4 Select one of the following options:
• Reboot Now - Reboot immediately.
• On Next Reboot - Manually reboot the server at a later time.
5 Click Reinstall. The rmware version is re-installed for the selected component or device.
Rolling Back Server Component Firmware
You can install the rmware image of the previously installed rmware for selected components or devices across one or more servers. The
rmware image is available within the Lifecycle Controller for a rollback operation. The availability is subject to the version compatibility logic
of the Lifecycle Controller. It also assumes the previous update was facilitated by the Lifecycle Controller.
Rolling Back Server Component Firmware Using CMC Web Interface
To rollback the server component rmware version to an earlier version:
1 In the CMC Web interface, expand the system tree, go to Server Overview and then click Update > Server Component Update.
The Server Component Update page is displayed, in the Choose Update Type section, select Update from File.
2 Filter the component or device (optional).
3 In the Rollback Version column, select the check box for the component or device for which you want to roll back the rmware.
4 Select one of the following options:
• Reboot Now - Reboot immediately.
• On Next Reboot - Manually reboot the server at a later time.
5 Click Rollback. The previously installed rmware version is re-installed for the selected component or device.
Deleting Scheduled Server Component Firmware Jobs
You can delete jobs scheduled for the selected components and/or devices across one or more servers.
Deleting Scheduled Server Component Firmware Jobs Using Web Interface
To delete scheduled server component rmware jobs:
1 In the CMC Web interface, in the system tree, go to Server Overview and then click Update > Server Component Update.
The Server Component Update page is displayed.
2 In the Choose Update Type section, select Update from File. For more information, see Choosing Server Component Update Type
68
Updating Firmware