Users Guide
Field Description
additional information of the current job status. This information can be viewed by clicking or
hovering over the icon.
Update Selects the component or device for rmware update on the server.
Viewing Firmware Inventory Using RACADM
To view Firmware Inventory using RACADM, use the getversion command:
racadm getversion -l [-m <module>] [-f <filter>]
For more information, see the Chassis Management Controller for Dell PowerEdge M1000e RACADM Command Line Reference Guide
available at dell.com/support/manuals.
Saving Chassis Inventory Report Using CMC Web Interface
To save the chassis inventory report:
1 In the system tree, go to Server Overview, and then click Update > Server Component Update.
The Server Component Update page is displayed.
2 Click Save Inventory.
The Inventory.xml le is saved on an external system.
NOTE
: The Dell Repository Manager Application uses the
Inventory.xml
le as an input to create a repository. You must have
CSIOR enabled on the individual servers and save the chassis inventory report every time there is a change to the chassis
hardware and software conguration.
Conguring Network Share Using CMC Web Interface
To congure or edit the Network Share location or credentials:
1 In the CMC web interface, in the system tree, go to Server Overview and then click Network Share.
The Edit Network Share page is displayed.
2 In the Network Share Settings section, congure the following settings as required:
• Protocol
• IP Address or Host Name
• Share Name
• Update folder
• File Name (optional)
NOTE
: File Name is optional only when the default catalog le name is catalog.xml. If the catalog le name is changed,
then the new name must be entered in this eld.
• Prole Folder
• Domain Name
• User Name
• Password
• SMB Version
NOTE
: The SMB Version option is available only if the Protocol type is CIFS.
66 Updating Firmware