Users Guide
Platform Server Component Previous Component Version (N-1
Version)
Updated Component Version (N
Version)
M820 iDRAC 2.52.52.52 2.60.60.60
Lifecycle Controller 2.52.52.52 2.60.60.60
Diagnostics 4231A0 4247A1
BIOS 2.6.1 2.6.1
M630 iDRAC 2.52.52.52 2.60.60.60
Lifecycle Controller 2.52.52.52 2.60.60.60
Diagnostics 4239.44 4239A36
BIOS 2.6.0 2.7.1
M830 iDRAC 2.52.52.52 2.60.60.60
Lifecycle Controller 2.52.52.52 2.60.60.60
Diagnostics 4239.44 4239A36
BIOS 2.5.4 2.7.1
M640 iDRAC 3.15.15.15 3.21.21.21
Lifecycle Controller 3.15.15.15 3.21.21.21
Diagnostics 4301A13 4301A13
BIOS 1.3.7 1.4.8
Enabling Lifecycle Controller
You can enable the Lifecycle Controller service during the server boot process:
• For iDRAC servers, on the boot console, when prompted with the message Press <CTRL-E> for Remote Access Setup
within 5 sec.
, press <CTRL-E>. Then, on the setup screen, enable System Services.
• For iDRAC servers, on the boot console, select F2 for System Setup. On the setup screen, select iDRAC Settings and then select
System Services.
Cancelling System Services enables you to cancel all scheduled jobs that are pending and remove them from the queue.
For more information on the Lifecycle Controller and Server Component, and Device Firmware Management, see:
• Lifecycle Controller Remote Services User’s Guide.
• delltechcenter.com/page/Lifecycle+Controller.
The Server Component Update page enables you to update various rmware components on your system. To use the features and
functions on this page, you must have:
• For CMC: Server Administrator privilege.
• For iDRAC: Congure iDRAC privilege and Log in to iDRAC privilege.
Updating Firmware
59