Users Guide

where <CMC IP address> is the IP address for CMC and <port number> is the HTTPS port number.
The CMC Login page is displayed.
Related links
Conguring Web Browser
Logging Into CMC as Local User, Active Directory User, or LDAP User
Logging Into CMC Using Smart Card
Logging Into CMC Using Single Sign-on
Logging Into CMC as Local User, Active Directory
User, or LDAP User
To log in to CMC, you must have a CMC account with Log In to CMC privilege. The default CMC user name is root, and the password is
calvin. The root account is the default administrative account that ships with CMC.
NOTE:
• For added security, it is strongly recommended that you change the default password of the root account during initial setup.
• When Certicate Validation is enabled, Fully Qualied Domain Name (FQDN) of the system should be provided. If certicate
validation is enabled and IP address is provided for the Domain Controller, then the login is not successful.
CMC does not support extended ASCII characters, such as ß, å, é, ü, or other characters used primarily in non-English languages.
You cannot log in to the Web interface with dierent user names in multiple browser windows on a single workstation.
NOTE
: Multi Domain Conguration for CMC:
• The schema must be extended in all the Sub Domains in the forest.
• The user should be added to each domain and the CMC Device should be created in each Domain.
• When conguring the extended schema for CMC, the domain being congured must be mentioned. For example, if the root
domain is fwad2.lab and user is [e-mail], then the domain where the user is
congured is NodeA.GrandChildA.SubChildA.ChildA.fwad2.lab. The user
[e-mail] can be validated from CMC.
To log in as local user, Active Directory user, or LDAP user:
1 In the Username eld, type your user name:
• CMC user name: <user name>
• Active Directory user name: <domain>\<user name>, <domain>/<user name> or <user>@<domain>.
• LDAP user name: <user name>
NOTE
: "For Active Directory user, the Username is case sensitive.
2 In the Password eld, type the user password.
NOTE
: This eld is case-sensitive.
3 In the Domain eld, from the drop-down menu, select the required domain.
4 Optionally, select a session timeout. This is the amount of time you can stay logged in with no activity before you are automatically
logged out. The default value is the Web Service Idle Timeout.
5 Click OK.
You are logged into CMC with the required user privileges.
NOTE
: If LDAP authentication is enabled and you attempt logging into CMC using the local credentials, the credentials are rst
checked in the LDAP server and then in CMC.
NOTE: For LDAP authentication with OPEN-DS, the DH key must be larger than 768 bits.
Logging In to CMC 41