Users Guide
If, after 60 seconds, OSCAR still indicates that the slot is initializing, remove and then re-insert the server in the chassis. This action allows
iDRAC to reinitialize.
IOM
After a conguration change, sometimes CMC displays the IP address as 0.0.0.0.
Click the Refresh icon to see if the IP address is set correctly on the switch. If an error is made in setting the IP,mask, or /gateway, the
switch does not set the IP address and returns a 0.0.0.0 in all elds.
Common errors are:
• Setting the out-of-band IP address to be the same as, or on the same network as, the in-band management IP address.
• Entering an invalid subnet mask.
• Setting the default gateway to an address that is not on a network that is directly connected to the switch.
For more information on IOM network settings, see the Dell PowerConnect M6220 Switch Important Information document and the Dell
PowerConnect 6220 Series Port Aggregator White Paper at dell.com/support/manuals.
Single Sign On
Though CMC is setup to allow Single Sign-On (SSO), the browser displays a blank page.
Only Mozilla Firefox and Internet Explorer browsers are supported at this time for SSO. Check the browser settings for the correct setup.
For more information, see the Conguring Browser for SSO Login section.
If the browsers are congured correctly, both browsers must allow you to log in without entering the name and password. Use the Fully
Qualied Domain Name (FQDN) for the CMC. For example, myCMC.Domain.ext/ in the Address bar of the browser. The browser
redirects you to the https (secure mode) and enables you to log in to the CMC. Both http and https are valid for the browsers. If you save
the URL as a bookmark, you do not have to any text after the last forward slash in the example. If you still cannot log in using the SSO, see
the Conguring CMC SSO or Smart Card Login for Active Directory Users section.
272
Frequently Asked Questions