Users Guide

Item Description
RPM Current fan speed in RPM.
Table 67. PSU Status
Item Description
Name/Location Example: PSU1, PSU2, and so on.
Error Messages If there are no errors then the message “No Errors” is displayed, else error messages are listed. Critical errors are
listed rst, followed by warnings.
Status Oine, Online, or Standby.
Maximum Wattage Maximum Wattage that PSU can supply to the system.
Table 68. IOM Status
Item Description
Name/Location Example: IOM A1, IOM B1. and so on.
Error Messages If there are no errors then the message “No Errors” is displayed, else error messages are listed. Critical errors are listed
rst, followed by warnings. For more information see LCD Error Messages.
Status O or On.
Model Model of the IOM.
Fabric Type Networking type.
IP address Only shows if IOM is On. This value is zero for a pass through type IOM.
Service Tag The factory-assigned service tag.
Table 69. iKVM Status
Item Description
Name iKVM.
No Error If there are no errors then the message “No Errors” is displayed, else error messages are listed. Critical errors are listed
rst, followed by warnings. For more information see LCD Error Messages.
Status O or On.
Model/
Manufacture
A description of the iKVM model.
Service Tag The factory-assigned service tag.
Part Number The Manufacturer part number.
Firmware
Version
iKVM rmware version.
Hardware
Version
iKVM hardware version.
NOTE: This information is dynamically updated
264 Using LCD Panel Interface