Users Guide

Severity Message Cause
Critical An I/O channel check NMI was detected on a
component at bus <number> device <number>
function <number>.
A critical interrupt is generated in the I/O Channel.
Critical An I/O channel check NMI wa detected on a
component at slot <number>.
A critical interrupt is generated in the I/O Channel.
Critical A PCI parity error was detected on a component at
bus <number> device <number> function <number>.
Parity error was detected on the PCI bus.
Critical A PCI parity error was detected on a component at
slot <number>.
Parity error was detected on the PCI bus.
Critical A PCI system error was detected on a component at
bus <number> device <number> function <number>.
PCI error detected by device.
Critical A PCI system error was detected on a component at
slot <number>.
PCI error detected by device.
Critical Persistent correctable memory error logging disabled
for a memory device at location <location>.
Single bit error logging is disable when too many SBE get
logged for a memory device.
Critical All event logging is disabled.
Non- Recoverable CPU protocol error detected. The processor protocol entered a non-recoverable state.
Non- Recoverable CPU bus parity error detected. The processor bus PERR entered a non-recoverable state.
Non- Recoverable CPU initialization error detected. The processor initialization entered a non-recoverable state.
Non- Recoverable CPU machine check detected. The processor machine check entered a non-recoverable
state.
Critical Memory redundancy is lost.
Critical A bus fatal error was detected on a component at bus
<number> device <number> function <number>.
Fatal error is detected on the PCIe bus.
Critical A software NMI was detected on a component at bus
<number> device <number> function <number>.
Chip error is detected.
Critical Failed to program virtual MAC address on a
component at bus <number> device <number>
function <number>.
Flex address could be programmed for this device.
Critical Device option ROM on mezzanine card <number>
failed to support Link Tuning or FlexAddress.
Option ROM does not support Flex address or linking
tuning.
Critical Failed to get Link Tuning or FlexAddress data from
iDRAC.
NOTE: For information on other server related LCD messages, see "Server User Guide".
LCD Module and Server Status Information
The tables in this section describe status items that are displayed on the front panel LCD for each type of component in the chassis.
262
Using LCD Panel Interface