Users Guide

• CMC information
• Chassis information
• Session information
• Sensor information
• Firmware build information
Supported Interfaces
• CLI RACADM
• Remote RACADM
• Telnet RACADM
Racdump includes the following subsystems and aggregates the following RACADM commands. For more information on racdump, see the
Chassis Management Controller for Dell PowerEdge M1000e RACADM Command Line Reference Guide.
Table 50. Racadm commands for subsystems
Subsystem RACADM Command
General System/RAC information
getsysinfo
Session information
getssinfo
Sensor information
getsensorinfo
Switches information (IO Module)
getioinfo
Mezzanine card information (Daughter card)
getdcinfo
All modules information
getmodinfo
Power budget information
getpbinfo
KVM information
getkvminfo
NIC information (CMC module)
getniccfg
Redundancy information
getredundancymode
Trace log information
gettracelog
RAC event log
gettraclog
System event log
getsel
Downloading SNMP Management Information Base File
The CMC SNMP Management Information Base (MIB) File denes chassis types, events, and indicators. CMC enables you to download
the MIB le using the Web Interface.
To download the CMC's SNMP Management Information Base (MIB) le using the CMC Web interface:
1 In the system tree, go to Chassis Overview and click Network > Services > SNMP.
The SNMP Conguration section is displayed.
2 Click Save to download the CMC MIB le to your local system.
For more information on the SNMP MIB le, see the Dell OpenManage Server Administrator SNMP Reference Guide at dell.com/
support/manuals.
240
Troubleshooting and Recovery