Manualshelf

Users Guide

ManualsBrandsDell ManualsActive System ManagerChassis Management Controller Version 6.10 For Dell PowerEdge M1000e
201202203204205206207208209210
For information about the elds, see CMC Online Help
NOTE: The Summary VLANs of All Ports section displays information about the IOMs present in the Chassis and the
assigned VLANs. Click Save to save a csv le of the summary of the current VLAN settings.
NOTE: The CMC Managed VLANs section displays the summary of all VLANs assigned to the IOMs.
8
Click Apply.
The network settings are congured for the IOM(s).
Viewing the VLAN settings on IOMs Using CMC Web Interface
To view the VLAN settings on IOM(s) using the CMC Web interface:
1 In the system tree, go to I/O Module Overview and click Setup > VLAN Manager.
The VLAN Manager page is displayed.
The Summary VLANs of All Ports section displays information about the current VLAN settings for the IOMs.
2 Click Save to save the VLAN settings to a le.
Viewing the Current VLAN Settings on IOMs Using CMC Web Interface
To view the current VLAN settings on IOMs using the CMC Web Interface:
1 In the system tree, go to I/O Module Overview and click Setup > VLAN Manager .
The VLAN Manager page is displayed.
2 In the Edit VLANs section, select Show VLANs in the drop down list and click Apply.
An Operation Successful message is displayed. The current VLAN settings that are assigned to the IOMs are displayed in the VLAN
Assignment Summary eld.
Adding Tagged VLANs for IOMs Using CMC Web Interface
To add tagged VLANs for IOM(s) using the CMC Web interface:
1 In the system tree, go to I/O Module Overview and click Setup > VLAN Manager.
The VLAN Manager page is displayed.
2 In the Step 1: Select I/O Module section, select the required IOMs.
3 In the Step 2: Specify Port Range section, select the range of fabric ports to be assigned to the selected IOM(s).
For information about the elds, see CMC Online Help.
4 Select the Select or Deselect All option to apply the changes to all or no IOMs.
or
Select the check box against the specic slots to select the required IOMs.
5 In the Step 3: Edit VLANs section, select Add Tagged VLANs in the drop down list and click Apply.
The tagged VLANs are assigned to the selected IOMs.
The operation successful message is displayed. The current VLAN settings that are assigned to the IOMs are displayed in the VLAN
Assignment Summary eld.
Managing Input Output Fabric
201