Users Guide

Conguring Management VLAN on IOMs Using RACADM
To congure management VLAN on IOMs using RACADM, use the racadm setniccfg –m switch-n -v command.
Specify the VLAN ID and priority of a particular IOM with the following command:
racadm setniccfg -m switch -<n> -v <VLAN id> <VLAN priority>
The valid values for <n> are 1 – 6.
The valid values for <VLAN> are 1 – 4000 and 4021 – 4094. Default is 1.
The valid values for <VLAN priority> are 0 – 7. Default is 0.
For example:
racadm setniccfg -m switch -1 -v 1 7
For example:
To remove an IOM VLAN, disable the VLAN capabilities of the specied IOM's network:
racadm setniccfg -m switch-<n> -v
The valid values for <n> are 1 – 6.
For example:
racadm setniccfg -m switch-1 -v
Conguring VLAN settings on IOMs Using CMC Web Interface
NOTE
: You can congure VLAN settings only on PowerEdge M I/O Aggregator IOM. Other IOMs including MXL 10/40GbE are
not supported.
To congure the VLAN settings on IOM(s) using the CMC Web interface:
1 In the system tree, go to I/O Module Overview and click Setup > VLAN Manager.
The VLAN Manager page displays the IOM(s) that are turned on and the available ports.
2 In the Step 1: Select I/O Module section, select the conguration type from the drop down list, and then select the required IOM(s).
For information about the elds, see CMC Online Help
3 In the Step 2: Specify Port Range section, select the range of fabric ports to be assigned to the selected IOM(s).
For information about the elds, see CMC Online Help
4 Select the Select or Deselect All option to apply the changes to all or no IOMs.
or
Select the check box for the specic slots to select the required IOMs.
5 In the Step 3: Edit VLANs section, type the VLAN IDs for the IOMs. Provide VLAN IDs in the range 1-4094. VLAN IDs can be typed
as a range or separated by a comma. Example: 1,5,10,100-200.
6 Select one of the following options from the drop-down menu as required:
Add Tagged VLANs
Remove VLANs
Update untagged VLANs
Reset to all VLANs
Show VLANs
7 Click Save to save the new settings made to the VLAN Manager page.
200
Managing Input Output Fabric