Users Guide
Servers BIOS iDRAC Lifecycle Controller
PowerEdge M910 2.9.0 3.50 1.6
Power Edge M915 3.2.2 3.80 1.7.5.4
PowerEdge M420 2.3.3 2.40.40.40 2.40.40.40
PowerEdge M520 2.4.2 2.40.40.40 2.40.40.40
PowerEdge M620 2.5.4 2.40.40.40 2.40.40.40
PowerEdge M820 2.3.3 2.40.40.40 2.40.40.40
PowerEdge M630 2.7.1 2.52.52.52 2.52.52.52
PowerEdge M830 2.7.1 2.52.52.52 2.52.52.52
PowerEdge M640 1.0.0 3.10.10.10 3.10.10.10
NOTE: Array Software version 6.0.4 supports PowerEdge PSM4110.
Supported Remote Access Connections
The following table lists the supported Remote Access Controllers.
Table 7. Supported Remote Access Connections
Connection Features
CMC Network Interface ports
• GB port: Dedicated network interface for the CMC Web interface. Two 10/100/1000 Mbps
ports; one for management and the other for chassis to chassis cable consolidation.
• STK: Uplink port for chassis to chassis management network cable consolidation.
• 10 Mbps/100 Mbps/1 Gbps Ethernet through CMC GbE port.
• DHCP support.
• SNMP traps and email event notication.
• Network interface for the iDRAC and I/O Modules (IOMs).
• Support for Telnet/SSH command console and RACADM CLI commands including system
boot, reset, power-on, and shutdown commands.
Serial port
• Support for serial console and RACADM CLI commands including system boot, reset,
power-on, and shutdown commands.
• Support for binary interchange for applications designed to communicate with a binary
protocol to a particular type of IOM.
• Serial port can be connected internally to the serial console of a server, or I/O module, using
the connect (or racadm connect) command.
Other connections
• Access to the Dell CMC console through the Avocent Integrated KVM Switch Module
(iKVM).
Supported platforms
CMC supports modular systems designed for the PowerEdge M1000e platform. For information about compatibility with CMC, see the
documentation for your device.
For the latest supported platforms, see the Chassis Management Controller Version 6.0 Release Notes at dell.com/cmcmanuals.
20
Overview