Users Guide

Table 18. : QuickDeploy Settings
Setting Description
QuickDeploy Enabled Enables or disables the QuickDeploy feature that automatically applies the iDRAC settings
congured on this page to newly inserted servers. The auto conguration must be conrmed
locally on the LCD panel.
NOTE: This includes the root user password if the Set iDRAC Root Password on Server
Insertion box is checked.
By default, this option is disabled.
Action When Server is Inserted Select one of the following options from the list:
• No Action — No action is performed when the server is inserted.
• QuickDeploy Only— Select this option to apply iDRAC network settings when a new
server is inserted in the chassis. The specied auto-deployment settings are used to
congure the new iDRAC, which includes the root user password if Change Root
Password is selected.
• Server Prole Only— Select this option to apply server prole assigned when a new
server is inserted in the chassis.
• Quick Deploy and Server Prole — Select this option to rst apply the iDRAC network
settings, and then to apply the server prole assigned when a new server is inserted in the
chassis.
Set iDRAC Root Password on
Server Insertion
Species whether a server’s iDRAC root password must be changed to the value provided in
the iDRAC Root Password eld when the server is inserted.
iDRAC Root Password When Set iDRAC Root Password on Server Insertion and QuickDeploy Enabled options are
selected, this password value is assigned to a server's iDRAC root user password when the
server is inserted into chassis. The password can have 1 to 20 printable (including spaces)
characters.
Conrm iDRAC Root Password Veries the password entered into the iDRAC Root Password eld.
Enable iDRAC LAN Enables or disables the iDRAC LAN channel. By default, this option is disabled.
Enable iDRAC IPv4 Enables or disables IPv4 on iDRAC. By default, this option is enabled.
Enable iDRAC IPMI over LAN Enables or disables the IPMI over LAN channel for each iDRAC present in the chassis. By
default, it is disabled.
Enable iDRAC DHCP Enables or disables DHCP for each iDRAC present in the chassis. If this option is enabled, the
elds QuickDeploy IP, QuickDeploy Subnet Mask, and QuickDeploy Gateway are disabled,
and cannot be modied since DHCP is used to automatically assign these settings for each
iDRAC. By default, this option is disabled.
Reserved QuickDeploy IP
Addresses
Enables you to select the number of static IPv4 addresses reserved for the iDRACs in the
chassis. The IPv4 addresses starting from Starting iDRAC IPv4 Address (Slot 1) are
considered as reserved and assumed to be unused elsewhere in the same network. Quick
Deploy feature does not work for servers that are inserted into slots for which there is no
reserved static IPv4 address. The maximum number of static IP Addresses reserved for:
• Qurter-height servers are 32 IP addresses.
• Half-height servers are 16 IP addresses.
• Full-height servers are 8 IP addresses.
110 Conguring Server