Users Guide

[cfgLanNetworking]
cfgNicIpAddress=192.168.2.110
cfgNicGateway=192.168.2.1
This le is updated as follows:
#
# Object Group "cfgLanNetworking"
#
[cfgLanNetworking]
cfgNicIpAddress=192.168.1.143
# comment, the rest of this line is ignored
cfgNicGateway=192.168.1.1
The command racadm config -f <myfile>.cfg parses the le and identies any errors by line number. A correct le updates the
proper entries. Additionally, you can use the same getconfig command from the previous example to conrm the update.
Use this le to download company-wide changes or to congure new systems over the network with the command, racadm
getconfig -f <myfile> .cfg
.
NOTE: Anchor is a reserved word and should not be used in the .cfg le.
Viewing and Terminating CMC Sessions
You can view the number of users currently logged in to iDRAC and terminate the user sessions.
NOTE
: To terminate a session, you must have Chassis Conguration Administrator privilege.
Viewing and Terminating CMC Sessions Using Web Interface
To view or terminate a session using Web interface:
1 In the system tree, go to Chassis Overview and click Network > Sessions.
The Sessions page displays the session ID, username, IP address, and session type. For more information about these properties, see
the CMC Online Help.
2 To terminate the session, click Terminate for a session.
Viewing and Terminating CMC Sessions Using RACADM
You must have administrator privileges to terminate CMC sessions using RACADM.
To view the current user sessions, use the getssninfo command.
To terminate a user session, use the closessn command.
For more information about these commands, see the Chassis Management Controller for Dell PowerEdge M1000e RACADM Command
Line Reference Guide available at dell.com/support/manuals.
Conguring Enhanced Cooling Mode for Fans
The Enhanced Cooling Mode (ECM) feature provides additional cooling support using the third generation M1000e fans. The Enhanced
Cooling Mode (ECM) for fans is available only when all nine fan slots are populated with the new third generation M1000e fans. The new
third generation M1000e fans provide:
• Superior cooling to the installed blades compared to previous M1000e fan generations, when the ECM feature is enabled.
Conguring
CMC 105