CLI Guide

Example:
racadm getconfig -g cfgLanNetworking
cfgNicEnable=1
cfgNicIPv4Enable=1
cfgNicIpAddress=192.168.22.101
cfgNicNetmask=255.255.255.0
cfgNicGateway=192.168.22.101
cfgNicUseDhcp=1
# cfgNicMacAddress=00:00:00:00:00:01
cfgNicVLanEnable=0
cfgNicVLanID=1
cfgNicVLanPriority=0
cfgDNSServersFromDHCP=1
cfgDNSServer1=192.168.0.5
cfgDNSServer2=192.168.0.6
cfgDNSRacName=cmc-frankly
cfgDNSDomainName=fwad.lab
cfgDNSDomainNameFromDHCP=1
cfgDNSRegisterRac=1
cfgDNSServer2 (Read or Write)
Table 145. Details of attribute - cfgDNSServer2
Description
Retrieves the IPv4 address for DNS server 2. This parameter is only valid if cfgDNSServersFromDHCP is set to 0
(FALSE).
NOTE: cfgDNSServer1 and cfgDNSServer2 may be set to identical values while swapping addresses.
Legal Values
String representing a valid IPv4 address. For example: 192.168.0.20.
Default
0.0.0.0
cfgNicEnable (Read or Write)
Table 146. Details of attribute - cfgNicEnable
Description
Enables or disables CMC network interface controller (NIC). If the NIC is disabled, the remote network interfaces to
CMC are no longer accessible and CMC is only available through the local or serial RACADM interface.
Legal Values
• 1 (TRUE)
• 0 (FALSE)
CMC Property Database Group and Object Descriptions 99