CLI Guide

CMC Property Database Group and Object
Descriptions
CMC property database contains the conguration information. Associated object is organizing data, and object group is organizing object.
The IDs for the groups and objects that the property database supports are listed in this section.
To congure CMC, use the group and object IDs with the RACADM subcommands.
NOTE: You can congure a setting that does not have a hash symbol (#) as the prex in its output name. To modify a
congurable object, use the -o option.
NOTE: Racadm sets the value of objects without performing any functional validation on them. For example, RACADM allows
you to set the Certicate Validation object to 1 with the Active Directory object set to 0, even though Certicate Validation can
happen only if Active Directory is enabled. Similarly, the cfgADSSOEnable object can be set to 0 or 1 even if the cfgADEnable
object is 0, but it takes eect only if Active Directory is enabled.
All string values are limited to displayable ASCII characters, except where otherwise noted.
Topics:
• Displayable Characters
• idRacInfo
• cfgLanNetworking
• cfgRemoteHosts
• cfgUserAdmin
• cfgEmailAlert
• cfgSessionManagement
• cfgSerial
• cfgOobSnmp
• cfgTraps
• cfgRacTuning
• cfgServerInfo
• cfgActiveDirectory
• cfgLDAP
• cfgLDAPRoleGroup
• cfgStandardSchema
• cfgLocation
• cfgChassisPower
• cfgThermal
• cfgKVMInfo
• cfgLcdInfo
• cfgAlerting
• cfgIPv6LanNetworking
• cfgCurrentLanNetworking (Read Only)
• cfgCurrentIPv6LanNetworking (Read Only)
3
CMC Property Database Group and Object Descriptions 91