CLI Guide

NOTE:

• If the -f option is not specied, the lename defaults to sslcsr in your current

directory.

• The -f option is only supported on the remote interface(s).

Output If no options are specied, a CSR is generated and downloaded to the local le system as sslcsr by default. The -g

option cannot be used with the -s option, and the -f option can only be used with the -g option.

The sslcsrgen -s subcommand returns one of the following status codes:

• CSR was generated successfully.

• CSR does not exist.

Example

• Display current status of CSR operation:

racadm sslcsrgen -s

racadm sslcsrgen -g -f c:\csr\csrtest.txt

• Generate and download a CSR to local le system:

racadm -r 192.168.0.120 -u root -p calvin sslcsrgen -g -f csrtest.txt

NOTE: Before a CSR can be generated, the CSR elds must be congured in the RACADM config —g cfgracsecurity

group. For example:

racadm config -g cfgracsecurity -o cfgRacSecCsrCommonName cmc-effort.cmc.com

NOTE: In Telnet or SSH console, you can only generate and not download the CSR le.

NOTE: The duration for generating a CSR key depends on the length specied for the key.

sslresetcfg

Table 122. Details of sslresetcfg attribute

Description Restores the web-server certicate to factory default and restarts web-server. The certicate takes eect 30

seconds after the command is entered.

To run this subcommand,you must have the Chassis Conguration Administrator privilege.

Synopsis

racadm sslresetcfg

Input N/A

Example

racadm sslresetcfg

Certificate generated successfully and webserver restarted.

testcifsshare

Description

Tests the Common Internet File System (CIFS) share with the current SMB version.