CLI Guide

Switch-6 Not Present N/A N/A N/A N/A
Server-1 Present ON OK ABC1234 ABC1234
Server-2 Present ON OK ABC1234 ABC1234
Server-3 Present ON OK BCD1234 BCD1234
Server-4 Present ON OK BCD1234 BCD1234
Server-5 Present ON OK BCD1234 BCD1234
Server-6 Present ON OK BCD1234 BCD1234
Server-7 Present ON OK BCD1234 BCD1234
Server-8 Present ON OK BCD1234 BCD1234
Server-9 Present ON OK BCD1234 BCD1234
Server-10 Present ON OK ABC1234 ABC1234
Server-11 Present ON OK ABC1234 ABC1234
Server-12 Present ON OK BCD1234 BCD1234
Server-13 Present ON OK BCD1234 BCD1234
Server-14 Present ON OK ABC1234 ABC1234
Server-15 Present ON OK BCD1234 BCD1234
Server-16 Present ON OK BCD1234 BCD1234
KVM Present ON OK N/A N/A
IO-Cable Present ON OK noble01 N/A
FPC-Cable Present ON OK noble01 N/A
NOTE: A power state of "Primary" denotes Active CMC.
getniccfg
Table 62. Details of getniccfg attribute
Description
Displays the current NIC settings.
Synopsis
racadm getniccfg [-m <module>]
Input
–m <module> must be one of the following values:
• chassis : Default state if -m is not specied.
• server-<n> : where n=1–16
• server-<nx> : where n=1–8; x = a, b, c, d (lower case)
• switch-<n> : where n=1–6
52 RACADM Subcommand Details