CLI Guide

Server-16-C 10 GbE KR Present F8:DB:88:3D:6F:
4D
Unknown FlexAddress
Table 58. Displays Ethernet and iSCSI MAC/WWN address, Assignment Type, and Partition Status of all LOMs or mezzanine cards.
<Name> <Type> <Presence> <Active WWN/MAC> <Partition
Status>
<Assignment
Type>
CMC N/A Present 34:17:EB:E6:E0:2
4
N/A Factory
server-1-A 10 GbE KR Not Installed 10:98:36:AC:
70:EB
Not Installed Not Installed
Server-2 Not Installed Not Present Not Installed Not Installed Not Installed
Server-3-A Reserved Present
Switch-4 Not Installed Not Present Not Installed Not Installed Not Installed
Switch-1 Not Installed Not Present Not Installed N/A N/A
NOTE: If the I/O Modules in slots 1 and 2 are absent and the getmacaddress -a and getmacaddress —c all commands
are run, the output is displayed as Not Installed in the following columns:
• <Presence>
• <NIC1 MAC Address>
• <NIC2 MAC Address>
getmodinfo
Table 59. Details of getmodinfo attribute
Description Displays conguration and status information for all modules or a specied module (server, switch, CMC, fan unit,
power supply unit (PSU), KVM, or I2C cable) in the chassis.
A power state of "Primary" denotes Active CMC.
To run this subcommand, you must have the CMC Login User privilege.
NOTE: The Service tag eld is blank for modules that do not have service tag.
Synopsis
racadm getmodinfo [-m <module>] [-A]
Input
• -m <module> — Species the module whose conguration and status information you want to view. The
default command (no options) displays information about all major components in the chassis.
<module> may be any of the following values:
– server-<n> where n=1–16
– server-<nx> where n=1–8; x = a, b, c, d
– switch-<n> where n=1–6
– cmc-<n> where n=1–2
– fan-<n> where n=1–9
– ps-<n> where n=1–6
– chassis
50 RACADM Subcommand Details