Manualshelf

CLI Guide

ManualsBrandsDell ManualsActive System ManagerChassis Management Controller Version 6.10 For Dell PowerEdge M1000e
41424344454647484950
15 Enabled Not Present
16 Enabled Not Present
Table 34. For Fabric type
<Fabric> <Type> <Status>
A Gigabit Ethernet Enabled
B None Enabled
C None Enabled
Table 35. For Slot 9
<Fabric> <Type> <Server-Assigned> <Chassis-Assigned>
slot9-idrac Controller 18:A9:9B:FD:C1:C9 F8:BC:12:E5:FE:
98(active)
slot9-A1 10 GbE KR 00:90:FA:51:2E:
22
F8:BC:12:E5:FE:
99(active)
10 GbE KR/3 00:90:FA:51:2E:23
F8:BC:12:E5:FE:
9B(active)
FCoE-WWN 10:00:00:90:FA:51:2E:23 20:01:F8:BC:12:E5:FE:
9B(active)
slot9-A2 10 GbE KR 00:90:FA:51:2E:2A F8:BC:12:E5:FE:
9A(active)
slot9-B1 Gigabit Ethernet A0:36:9F:12:3D:38 F8:BC:12:E5:FE:
9D(active)
NOTE:
10 GbE KR/3— The value 3 indicates that the fabric is iSCSI/FCoE-FIP.
getfanreqinfo
Table 36. Details of getfanreqinfo attribute
Description Displays fan speed request for servers and switches in percent (%).
To run this subcommand, you must have the CMC Login User privilege.
Synopsis
racadm getfanreqinfo
Input N/A
Output None
RACADM Subcommand Details 41