CLI Guide
• Congure using severity as a parameter. For example, all informational events in storage category
are assigned powero as action, and email and snmp as notications:
racadm eventfilters set -c cmc.alert.storage.info -n email,snmp
• Congure using subcategory as a parameter. For example, all congurations under the licensing
subcategory in the audit category are assigned powero as action and all notications are enabled:
racadm eventfilters set -c cmc.alert.audit.lic -n all
• Congure using subcategory and severity as parameters. For example, all Information events under
the licensing subcategory in the audit category are assigned powero as action and all notications
are disabled:
racadm eventfilters set -c cmc.alert.audit.lic.info -n none
feature
Table 17. Details of feature attribute
Description Displays all active chassis features. The information displayed includes feature name, date activated and the serial
number of the SD card used to activate the feature.
Dell Feature Cards may contain more than a feature. After any feature included on a Dell Feature Card is activated on
a chassis, any other features that may be included on that Dell Feature Card cannot be activated on a dierent
chassis.
NOTE: To use this subcommand to deactivate FlexAddress, you must have the Chassis Conguration
Administrator privilege. A user with login privileges can view status only.
NOTE: To deactivate FlexAddress features, the chassis must be turned
o.
Synopsis
• racadm feature -s
• racadm feature -d -c <featurename>
• racadm feature -r -c ExtendedStorage
Input
-s
–Displays the status of active features.
-d
–Deactivates feature specied in -c option.
NOTE: When the FlexAddress and FlexAddressPlus feature are active, deactivating one of them results in
deactivation of the other feature also.
-r
—Reformats damaged or unformatted extended storage media.
CAUTION: Using the -r switch deactivates the extended storage feature, if active; reformats the SD card
in the active CMC card slot; and may Restart the active CMC.
-c
— <featurename> — must be one of the following:
• flexAddress
• flexAddressPlus
• ExtendedStorage (with -d, or -r)
NOTE: The —a option is not supported for CMC 5.0.
RACADM Subcommand Details 27