CLI Guide

• -v SNMPv2 <snmpCommunityString> ro — Species the SNMP community string for switches. Valid
community strings are 1–20 characters in length, with valid ASCII characters in the range [33–125] (decimal).
Protocol version set to SNMPv2. Permission on community string is read-only.
• -q — Displays or modies the quick deploy parameters.
• -n <numofblades> — Species the number of reserved IP addresses for quick deploy. The allowed values
are: 8, 16, and 32.
NOTE: The -q option must be specied with the -n option.
• -e — Uses the CMC DNS settings for quick deploy. The legal values are:
– 1 — Enable
– 0 — Disable
• --qd — Updates the quick deploy parameters to the servers. This option works only with the -q option.
Output None
Example
• Set root password, congure static IPV4 address, set rst boot device to HDD, and enable boot once for
server-1.
racadm deploy -m server-1 -u root -p <password> -s 192.168.0.20 255.255.255.0
192.168.0.1 -b HDD -o yes
• Set root password, congure static IPV6 address, set rst boot device to HDD, and enable boot once for
server-1.
racadm deploy -m server-1 -u root -p <password> -s -6 1 2001:DB8::2 64
2001:DB8::1 -b HDD -o yes
• Set root password and enable DHCP for server-3.
racadm deploy -m server-3 -u root -p <password> -d
• Set user name and password for switch-2.
racadm deploy -m switch-2 -u <username> -p <password>
• Set SNMP community string for switch-2.
racadm deploy -m switch-2 -v SNMPv2 DemoCommunityString ro
• Set root password to Calvin for all servers.
racadm deploy -a -u root -p calvin
• Set user name and password for all switches.
racadm deploy -a switch -u <username> -p <password>
• View the quick deploy parameters.
racadm deploy -q
• Modify the number of reserved IP addresses for quick deploy.
racadm deploy -q -n 8
eventlters
Table 16.
eventlters
Description
Gets, sets, and displays the list of event lter settings.
To use this subcommand with the get option, you must have the CMC Login User privilege.
Synopsis
racadm eventfilters <eventfilters command type>
racadm eventfilters get -c <alert descriptor>
racadm eventfilters set -c <alert descriptor>-n <notifications>
RACADM Subcommand Details 25