CLI Guide
testemail -- test CMC e-mail notifications
testfeature -- test CMC feature x
testtrap -- test CMC SNMP trap notifications
traceroute -- determine the route of a packet
traceroute6 -- determine the route of a packet
wsman -- perform wsman client functions for servers.
Example for RACADM? <subcommand>
racadm ? getsysinfo
getsysinfo -- display general CMC and system information
Usage:
racadm getsysinfo [-d] [-c] [-A] [-4] [-6]
-----------------------------------------------------------
Valid Options:
-d : show CMC information
-c : show chassis information
-A : do not show headers or labels
-4 : show CMC IPv4 information
-6 : show CMC IPv6 information
Help and help subcommand
Table 4. Help and help subcommand
Description
Lists all the subcommands available for use with RACADM and provides a short description about each
subcommand. You may also type a subcommand, group, object or Fully Qualied Descriptor (FQDD) name after
help.
Synopsis
• racadm help
• racadm help <subcommand>
• racadm help —g <groupname>
• racadm help –g <groupname> —o <objectname>
Input
• <subcommand> — species the subcommand for which you need the help information.
• <device name> — species the device name such as iDRAC, BIOS, NIC, LifecycleController, FC, system, or
Storage.
• <group> — species the group name supported by the corresponding device.
• <object> — species the object for the entered group.
Output
• The help command displays a complete list of subcommands.
• The racadm help <subcommand> command displays information for the specied subcommand only.
• The racadm help —g <groupname> command displays information for the specied group.
• The racadm help —o <objectname> command displays information for the specied object.
• The racadm help <device name> <Group> command displays information for the specied group.
• The racadm help <device name> <Object> command displays information for the specied object.
• The racadm help <device name> <Group> <Object> command displays information for the specied
object.
18 RACADM Subcommand Details