CLI Guide

cfgNetTuningNicAutoneg (Read or Write)
Table 360. Details of cfgNetTuningNicAutoneg attribute
Description
Enables auto negotiation of physical link speed and duplex. If enabled, auto negotiation takes priority over other
values set in this group.
Legal Values
• 0 = Auto Negotiation is Disabled
• 1 = Auto Negotiation is Enabled
Default
1
Example
racadm getconfig -g cfgNetTuning
cfgNetTuningNicSpeed=100
cfgNetTuningNicFullDuplex=1
cfgNetTuningNicMtu=1500
cfgNetTuningNicAutoneg=1
cfgNetTuningNicFullDuplex (Read or Write)
Table 361. Details of cfgNetTuningNicFullDuplex attribute
Description
Species the duplex setting for the NIC. This property is used only if thecfgNetTuningNicAutoNeg is set to 0
(disabled).
Legal Values
• 0 (Half Duplex)
• 1 (Full Duplex)
Default
1
cfgNetTuningNicMtu (Read or Write)
Table 362. Details of cfgNetTuningNicMtu attribute
Description
Indicated the maximum size of units in bytes transmitted by NIC.
Legal Values
576–1500
Default
1500
NOTE: IPv6 requires a minimum MTU of 1280. If IPv6 is enabled, and cfgNetTuningMtu is set to a lower value, the CMC uses an
MTU of 1280.
170 CMC Property Database Group and Object Descriptions