CLI Guide

cfgCurrentIPv6DNSServer2 (Read Only)
Table 358. Details of cfgCurrentIPv6DNSServer2 attribute
Description
Displays the IPv6 address for DNS server 2.
Legal Values
<blank>
Default
None
Example
racadm getconfig -g cfgCurrentIPv6LanNetworking
# cfgCurrentIPv6Enabled=1
# cfgCurrentIPv6AutoConfigWasUsed=1
# cfgCurrentLinkLocalAddress=fe80::21e:4fff:fe1f:5371/64
# cfgCurrentIPv6Address1=2009:123::e48f:9dd8:6f51:a669/64
# cfgCurrentIPv6Address2=fd88:1::21e:4fff:fe1f:5371/64
# cfgCurrentIPv6Address3=fd88:2::21e:4fff:fe1f:5371/64
# cfgCurrentIPv6Gateway=fe80::21c:23ff:fe77:6215
# cfgCurrentIPv6DNSServersFromDHCP6=1
# cfgCurrentIPv6DNSServer1=2009:123::1
# cfgCurrentIPv6DNSServer2=::
cfgNetTuning
This group enables users to congure the advanced network interface parameters. When congured, the updated settings may take up to
a minute to become active.
CAUTION
: Use extra precaution when modifying properties in this group. Inappropriate modication of the properties in this
group can result in your RAC NIC become inoperable.
The following sections provide information about the objects in the cfgNetTuning group.
cfgNetTuningNicSpeed (Read or Write)
Table 359. Details of cfgNetTuningNicSpeed attribute
Description
Species the speed for the CMC NIC. This property is used only if cfgNetTuningNicAutoNeg is set to 0.
Legal Values
10, 100, or 1000
Default
100
CMC Property Database Group and Object Descriptions 169