CLI Guide

Default
<blank>
cfgRhostsSyslogServer3 Read or Write)
Table 165. Details of attribute - cfgRhostsSyslogServer3
Description
To store the RAC and SEL logs specify the third of three possible remote syslog servers. This property is only valid if
cfgRhostsSyslogEnable is set to 1(enabled).
Legal Values
Valid host name or IPv4 or IPv6 address.
Default
<blank>
cfgRhostsSyslogPowerLoggingEnabled Read or Write)
Table 166. Details of attribute - cfgRhostsSyslogPowerLoggingEnabled
Description To remote syslog servers, Enables or disables power consumption logging.
NOTE: Remote syslog must be enabled and more than one remote syslog servers must be congured to
log the power consumption.
Legal Values
• 1 — Enabled
• 0 — Disabled
Default
0
cfgRhostsSyslogPowerLoggingInterval (Read or Write)
Table 167. Details of attribute - cfgRhostsSyslogPowerLoggingInterval
Description Species the power consumption collection/logging interval.
Legal Values
1–1440 (minutes)
Default
5
Example
racadm getconfig -g cfgRemoteHosts [-m server-<n>]
cfgRhostsFwUpdateTftpEnable=1
cfgRhostsFwUpdateIpAddr=0.0.0.0
cfgRhostsFwUpdatePath=
cfgRhostsSmtpServerIpAddr=localhost.localdomain
cfgRhostsNtpEnable=0
cfgRhostsNtpServer1=
cfgRhostsNtpServer2=
cfgRhostsNtpServer3=
cfgRhostsNtpMaxDist=16
cfgRhostsSyslogEnable=0
cfgRhostsSyslogPort=514
CMC Property Database Group and Object Descriptions
105