CLI Guide

cfgRhostsSyslogEnable (Read or Write)
Table 161. Details of attribute - cfgRhostsSyslogEnable
Description
To allow the RAC and SEL logs to be written to up to three remote syslog servers Enables or disables remote syslog.
Legal Values
• 1 (TRUE)
• 0 (FALSE)
Default 0
cfgRhostsSyslogPort (Read or Write)
Table 162. Details of attribute - cfgRhostsSyslogPort
Description Remote syslog port number to use for writing the RAC and SEL logs to a remote syslog server.
This setting takes eect only if the cfgRhostsSyslogEnable parameter is set to 1(enabled).
Legal Values
10–65535
NOTE: The following port numbers are reserved and cannot be used: 21, 68, 69, 123, 161, 546, 801, 4096,
5988, 5989, 6900, 9000, 60106.
Default 514
cfgRhostsSyslogServer1 Read or Write)
Table 163. Details of attribute - cfgRhostsSyslogServer1
Description
To store the RAC and SEL logs specify the rst of three possible remote syslog servers. This property is only valid if
cfgRhostsSyslogEnable is set to 1 (enabled).
Legal Values
Valid host name or IPv4 or IPv6 address.
Default
<blank>
cfgRhostsSyslogServer2 Read or Write)
Table 164. Details of attribute - cfgRhostsSyslogServer2
Description
To store the RAC and SEL logs Specify the second of three possible remote syslog servers. This property is only valid
if cfgRhostsSyslogEnable is set to 1 (enabled).
Legal Values
Valid host name or IPv4 or IPv6 address.
104 CMC Property Database Group and Object Descriptions