Users Guide

Table Of Contents
2. Click OK to delete the selected profile.
Configuring Multiple CMCs through RACADM Using
Chassis Configuration Profiles
By using chassis configuration profiles, you can export the chassis configuration profiles as an XML file and import it to another
chassis.
Use RACADM get command for export operation and set command for import operation.You can export chassis profiles (XML
files) from CMC to the network share or to a local management station and import chassis profiles (XML files) from the network
share or from a local management station.
NOTE: By default, the export is done as clone type. You can use the clone to get the clone type profile in XML file.
The import and export operation to and from the network share can be done through local RACADM as well as remote
RACADM. Whereas, the import and export operation to and from the local management can be done only through remote
RACADM interface.
Exporting Chassis Configuration profiles
You can export chassis configuration profiles to network share by using the get command.
1. To export the chassis configuration profiles as clone.xml file to CIFS network share by using get command, type the
following:
racadm get f clone.xml t xml l //xx.xx.xx.xx/PATH u USERNAME p PASSWORDCMC
2. To export the chassis configuration profiles as clone.xml file to NFS network share by using get command, type the
following:
racadm get f clone.xml t xml l xx.xx.xx.xx:/PATH
You can export chassis configuration profiles to network share through a remote RACADM interface.
1. To export the chassis configuration profiles as clone.xml file to CIFS network share, type the following:
racadm r xx.xx.xx.xx u USERNAMECMC p PASSWORDCMC get f clone.xml t xml l //
xx.xx.xx.xx/PATH u USERNAME p PASSWORD
2. To export the chassis configuration profiles as clone.xml file to NFS network share, type the following:
racadm r xx.xx.xx.xx u USERNAMECMC p PASSWORDCMC get f clone.xml t xml l
xx.xx.xx.xx:/PATH
you can export chassis configuration profiles to local management station through remote RACADM interface.
1. To export the chassis configuration profiles as clone.xml file, type the following:
racadm r xx.xx.xx.xx u USERNAMECMC p PASSWORDCMC get f clone.xml t xml
Importing Chassis Configuration profiles
You can import chassis configuration profiles from network share to another chassis by using the set command.
1. To import the chassis configuration profiles from CIFS network share, type the following:
racadm set f clone.xml t xml l //xx.xx.xx.xx/PATH u USERNAME p PASSWORDCMC
2. To import the chassis configuration profiles from NFS network share, type the following:
racadm set f clone.xml t xml l xx.xx.xx.xx:/PATH
92
Configuring CMC