Users Guide

Updating iKVM Firmware Using RACADM
To update iKVM rmware using RACADM, use the fwupdate subcommand. For more information, see the Chassis Management
Controller for Dell PowerEdge M1000e RACADM Command Line Reference Guide.
Updating IOM Infrastructure Device Firmware
By performing this update, the rmware for a component of the IOM device is updated, but not the rmware of the IOM device
itself; the component is the interface circuitry between the IOM device and CMC. The update image for the component resides in
the CMC le system, and the component displays as an updatable device on the CMC Web interface only if the current revision on
the component and the component image on CMC do not match.
Before updating IOM infrastructure device rmware, make sure the CMC rmware is updated.
NOTE:
CMC allows IOM infrastructure device rmware (IOMINF) updates only if it detects that the IOMINF rmware is out-of-date with
the image contained in CMC le system. If the IOMINF rmware is up-to-date, CMC prevents IOMINF updates. Up-to-date IOMINF
devices are not listed as updatable devices.
Related link
Downloading CMC Firmware
Viewing Currently Installed Firmware Versions
Updating IOM Software Using CMC Web Interface
Updating IOM Coprocessor Using CMC Web Interface
To update the IOM Infrastructure device rmware, in the CMC Web interface:
1. Go to Chassis Overview → I/O Module Overview → Update.
The IOM Firmware Update page is displayed.
Alternatively, go to any of the following:
• Chassis Overview → Update → IOM Coprocessor
• Chassis Overview → CMC Firmware → Apply CMC Update → IOM Coprocessor
• Chassis Overview → iKVM Firmware → Apply iKVM Update → IOM Coprocessor
The Firmware Update page is displayed, which provides a link to access the IOM Firmware Update page.
2. In the IOM Firmware Update page, in the IOM Firmware section, select the checkbox in the Update column for the IOM you
want to update the rmware and click Apply Firmware Update .
The Update Status section provides rmware update status information. A status indicator displays on the page while the
image le uploads. File transfer time varies based on connection speed. When the internal update process begins, the page
automatically refreshes and the Firmware update timer is displayed.
NOTE:
• Do not click the Refresh icon or navigate to another page during the le transfer.
• The le transfer timer is not displayed when updating IOMINF rmware.
• If the IOM Coprocessor has the latest rmware version, the check box is not displayed in the Update column.
When the update is complete, there is a brief loss of connectivity to the IOM device since it resets and the new rmware is
displayed on the IOM Firmware Update page.
Updating IOM Firmware Using RACADM
To update IOM infrastructure device rmware using RACADM, use the fwupdate subcommand. For more information, see Chassis
Management Controller for Dell PowerEdge M1000e RACADM Command Line Reference Guide.
48