Users Guide
IOM Switches Minimum version of CMC
Brocade M6505 CMC 4.3
Cisco Nexus B22DELL CMC 4.3
Latest Firmware Versions for This Release
The following table lists the latest rmware versions for BIOS, iDRAC, and Lifecycle Controller that support the servers listed:
Table 6. Latest Firmware Versions for BIOS, iDRAC, and Lifecycle Controller
Servers BIOS iDRAC Lifecycle Controller
PowerEdge M600 2.4.0 1.65 Not Applicable
PowerEdge M605 5.4.1 1.65 Not Applicable
PowerEdge M805 2.3.3 1.65 Not Applicable
PowerEdge M905 2.3.3 1.65 Not Applicable
PowerEdge M610 6.3.0 3.50 1.6
PowerEdge M610x 6.3.0 3.50 1.6
PowerEdge M710 6.4.0 3.80 1.7.5.4
PowerEdge M710HD 7.0.0 3.50 1.6
PowerEdge M910 2.9.0 3.50 1.6
Power Edge M915 3.2.2 3.80 1.7.5.4
PowerEdge M420 2.3.3 2.40.40.40 2.40.40.40
PowerEdge M520 2.4.2 2.40.40.40 2.40.40.40
PowerEdge M620 2.5.4 2.40.40.40 2.40.40.40
PowerEdge M820 2.3.3 2.40.40.40 2.40.40.40
PowerEdge M630 2.2.5 2.40.40.40 2.40.40.40
PowerEdge M830 2.2.5 2.40.40.40 2.40.40.40
PowerEdge M640 1.0.0 3.10.10.10 3.10.10.10
NOTE: Array Software version 6.0.4 supports PowerEdge PSM4110.
Supported Remote Access Connections
The following table lists the supported Remote Access Controllers.
Table 7. Supported Remote Access Connections
Connection Features
CMC Network Interface ports
• GB port: Dedicated network interface for the CMC Web interface. Two 10/100/1000
Mbps ports; one for management and the other for chassis to chassis cable
consolidation.
• STK: Uplink port for chassis to chassis management network cable consolidation.
• 10 Mbps/100 Mbps/1 Gbps Ethernet through CMC GbE port.
• DHCP support.
• SNMP traps and email event notication.
• Network interface for the iDRAC and I/O Modules (IOMs).
19