Users Guide

Resetting VLANs for IOMs Using CMC Web Interface

To reset VLANs for IOM(s) to default congurations using the CMC web interface:

In the system tree, go to I/O Module Overview and click Setup → VLAN Manager.

The VLAN Manager page is displayed.

2. In the Step 1: Select I/O Module section, select the required IOMs.

3. In the Step 3: Edit VLANs section, select Reset VLANs in the drop down list and click Apply.

A warning message is displayed indicating that the congurations of the existing VLANs will be overwritten with the default

congurations.

4. Click OK to conrm.

The VLANs are assigned to the selected IOMs according to the default congurations.

An Operation Successful message is displayed. The current VLAN settings that are assigned to the IOMs are displayed in the

VLAN Assignment Summary eld.

NOTE: The Reset to All VLANs option is not supported in IOAs in Virtual Link Trunking (VLT) mode.

Managing Power Control Operation for IOMs

For information to set the power control operation for IOM(s), see Executing Power Control Operations on an IOM.

Enabling or Disabling LED Blinking for IOMs

For information to enable LED blinking for IOM(s), see Conguring LEDs to Identify Components on the Chassis.

176