Users Guide

Adding Tagged VLANs for IOMs Using CMC Web Interface
To add tagged VLANs for IOM(s) using the CMC Web interface:
1.
In the system tree, go to I/O Module Overview and click Setup → VLAN Manager.
The VLAN Manager page is displayed.
2. In the Step 1: Select I/O Module section, select the required IOMs.
3. In the Step 2: Specify Port Range section, select the range of fabric ports to be assigned to the selected IOM(s).
For information about the elds, see CMC Online Help.
4. Select the Select or Deselect All option to apply the changes to all or no IOMs.
or
Select the check box against the specic slots to select the required IOMs.
5. In the Step 3: Edit VLANs section, select Add Tagged VLANs in the drop down list and click Apply.
The tagged VLANs are assigned to the selected IOMs.
The operation successful message is displayed. The current VLAN settings that are assigned to the IOMs are displayed in the
VLAN Assignment Summary eld.
Removing VLANs for IOMs Using CMC Web Interface
To remove VLANs from IOM(s) using the CMC Web interface:
1. In the system tree, go to I/O Module Overview and click Setup → VLAN Manager.
The VLAN Manager page is displayed.
2. In the Step 1: Select I/O Module section, select the required IOMs.
3. In the Step 3: Edit VLANs section, select Remove VLANs in the drop down list and click Apply.
The VLANs assigned to the selected IOMs are removed.
An Operation Successful message is displayed. The current VLAN settings that are assigned to the IOMs are displayed in the
VLAN Assignment Summary eld.
Updating Untagged VLANs for IOMs Using CMC Web Interface
To update untagged VLANs for IOM(s) using the CMC Web interface:
1. In the system tree, go to I/O Module Overview and click Setup → VLAN Manager.
The VLAN Manager page is displayed.
2. In the Step 1: Select I/O Module section, select the required IOMs.
3. In the Step 2: Specify Port Range section, select the range of fabric ports to be assigned to the selected IOM(s).
For information about the elds, see CMC Online Help.
4. Select the Select/Deselect All option to apply the changes to all or no IOMs.
or
Select the check box against the specic slots to select the required IOMs.
5. In the Step 3: Edit VLANs section, select Update the Untagged VLANs in the drop down list and click Apply.
A warning message is displayed that the congurations of the existing untagged VLAN will be overwritten with the
congurations of the newly assigned untagged VLAN.
6. Click OK to conrm.
The untagged VLANs are updated with the congurations of the newly assigned untagged VLAN.
An Operation Successful message is displayed. The current VLAN settings that are assigned to the IOMs are displayed in the
VLAN Assignment Summary eld.
175