Release Notes

• Host Name of Chassis

• IP Conguration

• DNS

• DNS Registration

• NTP

• Change Default Password

• Sending alerts when the power state of an IOM changes and when a power ON of IOM fails.

• Populating CMC Device name correctly in the inventory.

Release 5.13

• Added a RACADM command to enable or disable CMC failover due to network link loss.

• To check CMC changeover state for network failure: racadm cmcchangeover --state

• To enable this ag : racadm cmcchangeover -e 1

• To reset this ag : racadm cmcchangeover -e 0

Release 5.12

• Quick link to the Dell Tech Center page from the CMC web GUI.

Release 5.10

• Firmware and driver refresh of COMMs cards on Dell's 13th generation of PowerEdge servers.

• Capture and replicate chassis congurations through XML based on the Chassis conguration prole.

• Support for blinking server identication LED from Quick Link on the Homepage.

• Backup or restore through XML based on the chassis conguration prole.

• Create and deploy a library of Boot Identity Proles (boot from iSCSI/SAN congurations) to enable a quick restore of workload to a

spare server.

• Populate iDRAC DNS setting from the CMC Quick Deploy page.

• Display iDRAC DNS name as the slot name.

• Option to view iDRAC LCLog results directly in CMC after applying a Server Conguration Prole.

• Support for launching IOA GUI on Homepage, I/O Module overview page.

• Support to list IOA Flex modules on IOM properties page and in tooltip.

Release 5.01

• CMC Secure IOM mode is implemented in CMC 5.01 Secure IOM provides additional CMC security in support of MXL IOMs running in

UC-APL secured environments.

What is New