CLI Guide

cfgRhostsSyslogServer3 (Read or Write)
Description
To store the RAC and SEL logs specify the third of three possible remote syslog servers. This property is only valid if
cfgRhostsSyslogEnable is set to 1(enabled).
Legal Values
Valid host name or IPv4 or IPv6 address.
Default
<blank>
cfgRhostsSyslogPowerLoggingEnabled (Read or Write)
Description To remote syslog servers, Enables or disables power consumption logging.
NOTE: Remote syslog must be enabled and more than one remote syslog servers must be congured to
log the power consumption.
Legal Values
• 1 — Enabled
• 0 — Disabled
Default
0
cfgRhostsSyslogPowerLoggingInterval (Read or Write)
Description
Species the power consumption collection/logging interval.
Legal Values
1–1440 (minutes)
Default
5
Example
racadm getconfig -g cfgRemoteHosts [-m server-<n>]
cfgRhostsFwUpdateTftpEnable=1
cfgRhostsFwUpdateIpAddr=0.0.0.0
cfgRhostsFwUpdatePath=
cfgRhostsSmtpServerIpAddr=localhost.localdomain
cfgRhostsNtpEnable=0
cfgRhostsNtpServer1=
cfgRhostsNtpServer2=
cfgRhostsNtpServer3=
cfgRhostsNtpMaxDist=16
cfgRhostsSyslogEnable=0
cfgRhostsSyslogPort=514
cfgRhostsSyslogServer1=
cfgRhostsSyslogServer2=
cfgRhostsSyslogServer3=cfgRhostsSyslogPowerLoggingEnabled=1
cfgRhostsSyslogPowerLoggingInterval=5
cfgUserAdmin
This group provides conguration information about the users allowed to access CMC through the available remote interfaces.
CMC Property Database Group and Object Descriptions
97