CLI Guide

cfgRhostsNtpMaxDist (Read or Write)
Description
Species the NTP maximum distance parameter used to aid in NTP conguration.
Legal Values
1–128
Default
16
cfgRhostsSyslogEnable (Read or Write)
Description
To allow the RAC and SEL logs to be written to up to three remote syslog servers Enables or disables remote syslog.
Legal Values
• 1 (TRUE)
• 0 (FALSE)
Default 0
cfgRhostsSyslogPort (Read or Write)
Description
Remote syslog port number to use for writing the RAC and SEL logs to a remote syslog server.
This setting takes eect only if the cfgRhostsSyslogEnable parameter is set to 1(enabled).
Legal Values
10–65535
NOTE: The following port numbers are reserved and cannot be used: 21, 68, 69, 123, 161, 546, 801, 4096,
5988, 5989, 6900, 9000, 60106.
Default 514
cfgRhostsSyslogServer1 (Read or Write)
Description
To store the RAC and SEL logs specify the rst of three possible remote syslog servers. This property is only valid if
cfgRhostsSyslogEnable is set to 1 (enabled).
Legal Values
Valid host name or IPv4 or IPv6 address.
Default
<blank>
cfgRhostsSyslogServer2 (Read or Write)
Description
To store the RAC and SEL logs Specify the second of three possible remote syslog servers. This property is only valid
if cfgRhostsSyslogEnable is set to 1 (enabled).
Legal Values
Valid host name or IPv4 or IPv6 address.
Default
<blank>
96 CMC Property Database Group and Object Descriptions