CLI Guide
• Set user name and password for switch-2.
racadm deploy -m switch-2 -u <username> -p <password>
• Set SNMP community string for switch-2.
racadm deploy -m switch-2 -v SNMPv2 DemoCommunityString ro
• Set root password to Calvin for all servers.
racadm deploy -a -u root -p calvin
• Set user name and password for all switches.
racadm deploy -a switch -u <username> -p <password>
• View the quick deploy parameters.
racadm deploy -q
• Modify the number of reserved IP addresses for quick deploy.
racadm deploy -q -n 8
eventlters
Table 3. eventlters
Description
Gets, sets, and displays the list of event lter settings.
To use this subcommand with the get option, you must have the CMC Login User privilege.
Synopsis
racadm eventfilters <eventfilters command type>
racadm eventfilters get -c <alert descriptor>
racadm eventfilters set -c <alert descriptor>-n <notifications>
NOTE: The general format of an alert descriptor:
cmc.alert.category.[subcategory].[severity]
where, category is mandatory, but subcategory and severity are optional. A severity cannot
precede a subcategory.
Valid category values are:
• All
• System
• Updates
• Audit
• Cong
Valid severity values are:
• Critical
• Warning
• Informational
Valid examples of alert descriptors are:
• cmc.alert.all
• cmc.alert.audit
• cmc.alert.audit.lic
• cmc.alert.audit.warning
• cmc.alert.audit.lic.critical
Input
• get — Displays the list of event lter settings.
• set — Congures the actions and notications for a given event lter conguration.
24 RACADM Subcommand Details