CLI Guide

Example for RACADM? <subcommand>
racadm ? getsysinfo
getsysinfo -- display general CMC and system information
Usage:
racadm getsysinfo [-d] [-c] [-A] [-4] [-6]
-----------------------------------------------------------
Valid Options:
-d : show CMC information
-c : show chassis information
-A : do not show headers or labels
-4 : show CMC IPv4 information
-6 : show CMC IPv6 information
help and help subcommand
Table 2. help and help subcommand
Description
Lists all the subcommands available for use with RACADM and provides a short description about each
subcommand. You may also type a subcommand, group, object or Fully Qualied Descriptor (FQDD) name after
help.
Synopsis
• racadm help
• racadm help <subcommand>
• racadm help —g <groupname>
• racadm help –g <groupname> —o <objectname>
Input
• <subcommand> — species the subcommand for which you need the help information.
• <device name> — species the device name such as iDRAC, BIOS, NIC, LifecycleController, FC, system, or
Storage.
• <group> — species the group name supported by the corresponding device.
• <object> — species the object for the entered group.
Output
• The help command displays a complete list of subcommands.
• The racadm help <subcommand> command displays information for the specied subcommand only.
• The racadm help —g <groupname> command displays information for the specied group.
• The racadm help —o <objectname> command displays information for the specied object.
• The racadm help <device name> <Group> command displays information for the specied group.
• The racadm help <device name> <Object> command displays information for the specied object.
• The racadm help <device name> <Group> <Object> command displays information for the specied
object.
arp
Description
Displays the contents of the Address Resolution Protocol (ARP) table. ARP table entries cannot be added or deleted.
To use this subcommand, you must have Execute Diagnostic Commands.
Synopsis
racadm arp
Input N/A
Example
racadm arp
Output
RACADM Subcommand Details
17